User Manual

Set time stamp, device name, OSD content and picture overlap here. After enabling the

corresponding display and entering the content, drag them to change their position. Then click

the “Save” button to save the settings.

Picture Overlap Settings:

Check “OSD Content1”, choose “Picture Overlay” and click “Browse” to select the overlap

picture. Then click “Upload” to upload the overlap picture. The pixel of the image shall not

exceed 200*200, or it cannot be uploaded.

6.2.4 Screen Brightness

Click ConfigImageScreen Brightness to go to the following interface.

In this interface, you can set the brightness of the screen of the terminal. The adjustable range

is from 150 to 255.

6.2.5 White Light Control

Click ConfigImageWhite Light Control to go to the following interface.

Temperature Reading Panel with Face and Mask Recognition