User Manual

14
Temperature Reading & Face Recognition Terminal User Manual
4. Live View
4.1 Temperature Reading & Face Recognition View
4.1.1 Temperature Reading Requirements
For accuracy temperature Reading, here are some recommendations.
1. The detected person should place their face within the pre-defined face detection area.
The forehead should be in the middle of the “Temp zone” (make the green plus stay in the
middle of the "Temp zone"). The detected face should be about 12" to 16" (30cm~40cm)
away from the temperature measurement sensor.
2
. To
ensure proper and accurate readings, any headgear
should
be
removed so that the sensor
can scan the forehead clearly.
3. Inaccurate temperature may occur if the forehead of the detected person is not within the
“Temp zone”.
4. If the temperature is very lower than normal value in the “Temp zone”, please move
towards the temperature measurement sensor (2-8 inches or 5cm-20cm away from the
temperature sensor) to get the accurate value.