Quick Start Guide

H
1ft
1.3ft
30°
30°
10ft
Installation
4
30°
30°
6.5ft
Route the cables.
1
2 3
7
8
4 5 6
Ø33.5
32.0
Network Connection
5
Screws
4
2
3
Drill
Template
Bracket
Gang box
Wall
Cable Cover
Ambient Illumination Requirement
Make sure faces can be captured clearly.
Avoid direct sunlight and backlight .
The device should be at least 6.5ft away from the light,
and at least 10ft away from the window or door.
Installation
1
Pole Mounting
Paste the drill template onto the wall and
then drill the holes according to it.
Install the gang box on the wall. Then use two
screws to secure the bracket on the gang box.
Secure the bracket onto the wall with 4 screws.
Route and connect the cables and then
install the cable cover (if applicable).
Cable Entry
Hang the device onto the bracket hook and
then tighten the screws.
Note: Pole mounting bracket is not supplied with the
device by default.
Cut the hole on the installation
surface according to the drill
template.
Install the pole and then
tighten the nut.
Installation
Surface
Nut
Screw
Tighten the screw with a
L-shaped screwdriver.
Connect the cables.
Rubber plug
Install the rubber plug.
Fix the device and the
bracket with four screws.
Loosen the screws to adjust
the angle of the device.
0~25°
Height Requirement
The recommended installation height (H) is
from 4.25ft to 4.75ft which can cover human
height of 4.6ft ~ 6.3ft in the detection area. It
can be adjusted according to the actual scene.
The best temperature measuring distance
ranges from 1ft to 1.3ft.
The best face recognition distance ranges
from 1.6ft to 3.2ft.
① Make sure that the device and the PC are well connected via LAN.
② Find the Speco Blue Scanner from the website URL and then install
it in the computer. After that, run the s canner as shown below.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parame ter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192 .168 . 226 . 201
255 . 255 . 255 . 0
192 .168 . 226 . 1
i
Tip: Enter the adminis trator password, and
then modify the network p arameters.
Total Device: 3 Local IP Ad dress:192.168.1. 4
Subnet Mask:255.255. 255.0 Gateway: 192.1 68. 1.1 DNS：210.21.196. 6
Device Name Device Type IP Address Http Port Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192 .168 . 1 . 201
255 . 255 . 255 . 0
192 .168 . 1 . 1
Subnet Mask
Gateway
After modification, please enter the password of the administrator and click
“Modify” button to modify the settings.
The default password of the administrator is “1234
”.
④ Double-click the camera listed in the s canner or manually enter the IP
address in the address bar of the web browser to connect to the device. Then
follow directions to download and install the plugin.
⑤ Enter the username and password in the login interface.
The default username is admin; the default password is
1234.
③ The device is defaulted to obtain its IP address automatically from the DHCP
server. Click the information of the camera listed in the above table to show the
network information on the right hand.
If desired, you can modify the IP address and gateway of the camera and make
sure its network address is in the same local network segment as that of the
computer.
Screw (KM3*9)x4
Rubber Plug
Screwdriver
Drill Template
Bracket
296.3mm
316.3mm
Ø55
Package
4 Screws
(KM3*9)
Direct/indirect
sunlight through
window