Manual

U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
2.4. Functional Description
 Power :
Power input for supplying
Caution : If camera
into DC power connector.
 Network (LAN)
100Mbps Ethernet connector (RJ-
45) with PoE standard (802.3af). LED on the Ethernet connector shows
the status of the camera as follow
s:
- Link LED
It will be lit with orange color when network cabling is all right.
normal data transmission is under way. Off state indicates that there is trouble in network connection
- Status LED (
It will be lit in green or red depending on the status
① Green
: Green color indicates that the camera i
indicates that data transmission is possible. Blinking green means
②
Red : Continuous or blinking red indicates that hardware is in abnormal condition.
 Micro SD Card slot
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory
card, please push the SD card.
 Connect Camera
Connect Camera Unit.
 MIC/Line Input
Connect external audio source or microphone.
 Line Output
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi
audio mode.
LED will be lit with red
applied
Power input for supplying
12V DC power.
is powered by PoE, do not plug in DC Jack with active DC power
into DC power connector.
45) with PoE standard (802.3af). LED on the Ethernet connector shows
s:
It will be lit with orange color when network cabling is all right.
Blinking orange color indicates that
normal data transmission is under way. Off state indicates that there is trouble in network connection
It will be lit in green or red depending on the status
)
: Green color indicates that the camera i
s in normal operation mode. Continuous green
indicates that data transmission is possible. Blinking green means
that someone is connected
Red : Continuous or blinking red indicates that hardware is in abnormal condition.
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory
Connect external audio source or microphone.
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi
LED will be lit with red
momentarily and it will be lit with green after a while when power is
is powered by PoE, do not plug in DC Jack with active DC power
45) with PoE standard (802.3af). LED on the Ethernet connector shows
Blinking orange color indicates that
normal data transmission is under way. Off state indicates that there is trouble in network connection
s in normal operation mode. Continuous green
that someone is connected
.
Red : Continuous or blinking red indicates that hardware is in abnormal condition.
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi
-directional
momentarily and it will be lit with green after a while when power is