Manual

U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
2.3.3. Front and Rear view of
Main Unit
Figure 2-3. Front view
Figure 2-4. Rear view
2.3.4. Factory Default Switch
Factory default switch is provided for returning the IP camera to factory default state.
There are two functions assigned to factory default
1.
Returning to Factory Default State
return to factory default state.
2. Safe Removal of Micro-SD C
ard
removal.
Figure 2-
4. Factory Default switch and Micro
Micro SD Card
slot
Main Unit
Pin
Description
1
Line Output
2 Ground
3 MIC/
Line Input
4
Relay Output
5 Relay
Output
6 Sensor Input
7 Sensor Input
(+)
Connect
Camera
Connect Camera
Factory default switch is provided for returning the IP camera to factory default state.
There are two functions assigned to factory default
switch.
Returning to Factory Default State
: Press the switch about 5 seconds while power is applied to
ard
: Press the switch for 1 second to unmount Micro-
SD
4. Factory Default switch and Micro
-SD Card slot
Factory Default Switch
slot
Cable bracket screw hole
Description
Line Output
Line Input
Relay Output
Output
(-)
(+)
Connect Camera
Unit
: Press the switch about 5 seconds while power is applied to
SD
Card for safe