Quick Installation Guide

7
2.3 OSD cap detailed description
 Open the Closing Cap and fasten the Closing Cap well.
3. INSTALLATION
3.1 How to mount to wall
 Wall_Junction Box
 Wall
① Drill four screw holes on the wall plate to fix four plastic anchors (supplied) in the holes.
② Fix the plastic anchors in the holes.
③ Position the bracket on the screw points.
Tapping screw
(Ø4 x 30) x 4
Plastic anchor
x 4
Screw x 4
Closing Cap
SD Card
Factory Reset
L-Wrench (2.5mm)
Closing Cap Open