Intensifier® IP Bullet Camera QUICK INSTALLATION GUIDE O2iB50M Please read this manual carefully before installation and operation of the product.
Notice Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Installation and services should only be carried out by an authorized personnel according to local safety regulations. If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply and have it checked by your authorized dealer before reusing. Avoid installing the camera in extremely hot or cold places.
1. PRODUCT OVERVIEW Key Features 2.0 Mega pixel 1/2.8" SONY progressive sc an CMOS image sensor for excellent image quality IP67 rated weather-proof 2.7 ~ 12mm / 5.0 ~ 50mm X10 Optical zoom Cable managed bracket Perfect 3-Axis mechanism Triple Streaming of H.
Backlight Shutter Speed Noise Reduction Audio Streaming Audio Compression Data / Sample Rate Audio Input / Output Audio Security Network Supported Protocol System Integration Physical Environment Intelligent Video Alarm Trigger Video Buffer Alarm events Firmware Upgrade Etc Memory Slot Power Source Power Consumption Net Weight LED's Dimension(mm) Operating Temperature Storage Temperature DSS, Corridor-view (in H.264), Mirror / V-Flip, etc.
L-Wrench (4mm) x 1 L-Wrench (2.5mm) x 1 Junction Box x 1 Screw (M4 x 12L) x 4_ (Junction Box) CD x 1 2.2 Name and Function 1 2 3 4 5 6 7 NO. ITEM DESCRIPTION 1 Power Connector DC12V 2 Network and POE Connector POE (Power Over Ethernet) and LAN cable 3 Sensor In / Alarm Out Sensor Input : White(Sensor_In), Yellow(GND) Alarm Output : Black(Alarm_Out), Red(COM) 4 Audio-Out Audio Out (WHITE) 5 Audio-In Audio in (RED) 6 Lens 2.7 ~ 12 / 5.
2.3 OSD cap detailed description SD Card Factory Reset Closing Cap L-Wrench (2.5mm) Closing Cap Open Open the Closing Cap and fasten the Closing Cap well. 3. INSTALLATION 3.1 How to mount to wall Wall_Junction Box Tapping screw (Ø4 x 30) x 4 Plastic anchor x4 Screw x 4 Wall ① Drill four screw holes on the wall plate to fix four plastic anchors (supplied) in the holes. ② Fix the plastic anchors in the holes. ③ Position the bracket on the screw points. ④ Fix the bracket by tightening the screws.
① Panning 360˚ Slightly loosen Pan Bracket nut then adjust pan of the camera and tighten the Bracket nut. ② Tilt 0˚ ~ 100˚ Slightly loosen Tilt bolt then adjust tilt of the camera and tighten the bolt firmly. Panning 360° Rotation 360° Rotation Tilt Pan Tilt 0°100° L-Wrench ③ Rotation 360˚ Slightly loosen Tilt bolt then adjust rotation of the camera and tighten the bolt firmly. 3.3 Installation Example 3.3.
3.3.3 Accessing the Camera or video server’s Homepage 1) Open the browser and enter the camera’s IP address in the address bar or double click the device in IP Scanner. Enter the IP address here 2) Enter the user name and password when prompted. 3) Default user name is admin and password is 1234. 4) If prompted for installation of the Active-X plug-in, allow the installation. Active-X is needed to view video from Internet Explorer.
4.
