User Manual
33
Note: To change the access level of a user, the user must be deleted and added again with the new access level.
Delete user:
1. Select the user to be deleted in the user configuration list box.
2. Click the “Delete” button to delete the user.
Note: The default administrator account cannot be deleted.
4.6.2 Online User
Go to SecurityOnline User to view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).
4.6.3 Block and Allow Lists
Go to SecurityBlock and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or MAC address in the address box and click
the “Add” button.
4.6.4 Security Management
Go to SecuritySecurity Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login” function can be enabled here. If this function is
enabled, login failure after trying six times will make the login interface locked. The camera can be logged in again after a half hour
or after the camera reboots.
Password Security