Quick Start Guide

Tilt 90°
Pan 360°
Rotate
360°
Fixed screws
The monitoring image shall try to cover the lane, entering/exiting vehicles
and these vehicles' plate number shall be always seen in the video.
Try to avoid the objects that will block the camera, such as pillars,
obstacles, doors, etc.
Avoid the scenes with many trees or other moving objects (like humans, non-
motor vehicles).
Overhead Monitoring
The installation height (H) shall range from 15 ~ 20ft.
The distance D (between the location of the camera installation and the
captured area) shall range from 50 ~ 82ft. This distance (D) depends on the
installation height, usually 3 or 4 times as far as the installation height (H).
The distance of the captured area (L) shall be from 50 ~ 65ft.
Configuration requirements of camera and surrounding area
Note: The following installation requirements are based on optimum conditions,
your license capture rate may vary depending on speed, lighting, position, license
plate designs and other factors.