Quick Start Guide

* 1 It is recommended to install the security cap for outdoor installations.
* 2 DC 12V power supply is not required if a PoE switch or injector is used to power
the camera.
► Connecting Network Cable
① Loosen the nut from the main element.
② Run the network cable (without RJ 45 connector) through both elements.
Then crimp the cable with RJ 45 connector.
③ Connect the cable to the hermetic connector. Then tighten the nut and the
main cover.
2
1
3
1--ALM-COM
2--ALM-OPEN
3--ALM-INA
4--ALM-GND
Security cap
DC12V
ALARM
4 3 2 1