User Manual
14
4.2.6 Zoom/Focus
This function is only available for the model with motorized zoom lens. Within this section, zoom and focus can be controlled. If
the image is out of focus after a manual adjustment, one key focus can be used to set the focus automatically.
4.2.7 PTZ Configuration
This function is only available to use with a compatible external PTZ enclosure. Go to PTZProtocol interface as shown below.
Set the protocol, address and baud rate corresponding to the enclosure.
4.3 Event Setup
4.3.1 Motion Detection
Go to Event Setup Motion Detection to set motion detection alarm.