Quick Setup Guide

ManualsBrandsSpeco ManualsNVR8 Channel 4K Plug & Play Network Video Recorder with Built-In PoE, 2TB

Recording Setup

Connect the NVR via Web-Browser Viewer continued

Mobile View Software

continued

Connect the NVR via SpecoTech

Multi-Client Viewer Software

IP Camera Setup

Connect the NVR via Web-Browser Viewer

Alarm I/O Setup

Network Setup

• To setup a recording schedule, select SCHEDULE in the

RECORD menu.

• Select CHANNEL > select NONE, CONTINUOUS, MOTION,

or SENSOR > Highlight area for recording setting.

• To copy a schedule to a different channel, select the desired channel

from the COPY SCHEDULE menu and click COPY.

Setup Instructions:

• Make sure PC is connected to the Internet.

• Make sure NVR is setup using the steps in Network Setup section.

• Start Internet Explorer; go to ‘Tools’→ ‘Internet Options’ →

‘Security’ tab.

• Select ‘Trusted sites’ and click ‘Sites’ to specify its security setting.

• Enter the IP address of the NVR in this in this zone.

• In the Security Level area, click ‘Custom Level’. Under ‘ActiveX

controls and plug-ins’, set all items to ‘Enable’ or ‘Prompt’.

• Click ‘OK’ to accept the settings and close the

‘Security Settings’ screen. Obtain Network Information of the NVR.

installation.

• Install the plug-ins.

• Click on ‘Connect’ and enter the username, password,

and network port of the NVR.

1111 and user1 / 1111.

SpecoTech Multi-Client Viewer Software is a multiple site monitoring

client software that allows streaming of video and audio, and

transmission of alarm signals from the NVRs over the network.

The SpecoTech Multi-Client can display up to 16 NVRs and supports

dual monitors.

PTZ camera control is also supported by this software.

By attaching a microphone and speaker system to devices on site, the

user may make bi-directional audio communication over the network.

Refer to the complete manual for more information.

The SpecoTech Multi-Client Viewer Software and

manual are included on the CD.

200 New Highway

Amityville, NY 11701

1-800-645-5516

www.specotech.com

Quick Setup Guide

Speco Technologies is constantly developing and improving products.

notice and without incurring any obligation. Rev. 10/14/16

D+ S1 S3

S2 S4

D-

Sensor

Inputs

RS-485D-

RS-485D+

Alarm

Output

• In the SETUP menu, select the DEVICE tab and click on

ALARM-OUT.

• Set the sensor, motion, and video loss for triggering alarm relay output.

• HDD Error and Change to NO CONNECTION can also trigger beeping.

Select the NETWORK tab.

• For DHCP, set the Network

Type to DHCP and exit from

Subnet Mask, Gateway and

DNS settings are retrieved

from network servers.

DHCP is dynamic and the

settings will change from time

to time.

• For Static, set the Network Type to Static. Enter the IP address, Subnet

Mask, Gateway and DNS. Obtain this information from the network

service provider.

• To enable DDNS for free, Enter the NVR Name

and DDNS server name.

Select the IP Camera tab.

CHANNEL : Select the Channel to setup an IP Camera

VENDOR : Select the Brand of the Camera

SCAN : Automatically search the network for IP Cameras

IP : Enter the IP Address of the desired Camera

PORT : Enter the Camera stream Port Number (Default : 554)

WEB PORT : Enter the Camera Web Port Number (Default: 80)

PROTOCOL : Select a Protocol (Default: TCP)

ID : Enter the User ID for access to the IP Camera

PASSWORD : Enter the Password for the associated ID

• Obtain the local IP address from System Information from the

Sub Menu. To get global IP address, contact network administrator or

service provider.

• In the SETUP menu, select the SYSTEM tab and enable

CLIENT ACCESS.

• In the SETUP menu, select the NETWORK tab, obtain the network

and web port number.

• Start Internet Explorer and enter the IP address and web port of

the NVR.- For example: http:// [ip address] : [web port] →

http://172.16.2.62:80

and the Android™.

iPhone

/ iPad

• Search for ‘Speco Player’ in the Apple App Store

and install the app.

• Press (+) on the upper right and enter site information.

• Click SAVE to save the site information.

• Select the saved site from “Devices”

• Select a channel(s) to view.

• Select Playback/Live then click CONNECT

Android

™

• Search for ‘Speco Player’ in the Google Play Store and install the app.

• Select the ADD menu and enter site information.

• Click ADD to save the site information.

• Select the saved site from “Devices” for network connection.

• Select a channel and select Live view or Playback.

• Click on START button.

Speco Technologies NU & N32NS Series NVRs