User Manual

Playback & Backup

NVR User Manual

set the backup start time and end time) and then click “Export” button for record backup. Click “Playback” button to play the record in the playback

interface.

8.4.3 Event Search

① Click StartSearch and ExportEvent Search to go to “Event Search” tab as shown below.

② Check the event type in the interface as required.

③ Click to set the start time and end time on the top left of the interface.

④ Check cameras on the left side of the interface or check “All” to select all the cameras and then click to search the record. The searched

record will be displayed in the list.

⑤ Click in the list to play back the record in the popup window. Click to back up one record data or check multiple record data in the

list and then click “Backup” button for record batch backup.

⑥ Select one record data in the list and then click “Playback” button to play the record in the playback interface.

8.4.4 Bookmark Search

Only if you add the tags can you play the record by tag search. Click StartPlayback to go to the playback interface and then click on the

bottom of the camera window to add bookmarks when you want to mark the playback time point of the selected camera.

Click StartSearch and ExportBookmarks to go to “Bookmarks” tab.