Instruction Manual

38
MOTION
This function is used to detect moving objects in the monitored area. When choosing ON, the following
submenu will appear where you san adjust the settings for the MOTION function.
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SPECO DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
RETURN
DC
AUTO
OFF
MIDDLE
AUTO
OFF
8.MOTION
SENSITIVITY
WINDOW TONE
WINDOW USE
WINDOW ZONE
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
ALARM
RETURN
|IIIIIIIIIIIIII| 0
0
0
OFF
1
1
28
15
OFF
- SENSITIVITY [0~20] : The higher the setting value is, the higher the sensitivity gets, even though the
movement of a subject.
- WINDOW TONE [0~3] : Select the number of window use for motion detection.
- WINDOW USE [ON, OFF]
- WINDOW ZONE [ON, OFF]
- DET H-POS [0~60] : Define the horizontal start position of the monitoring area.
- DET V-POS [0~34] : Define the vertical start position of the monitoring area.
- DET H-ZISE [0~60] : Define the horizontal size of the monitoring area.
- DET V-SIZE [0~34] : Define the vertical size of the monitoring area.
- ALARM [ON, OFF] : In motion situation, you can select the detail of option setting.