Instruction Manual

MANUAL

KELVIN

R-GAIN

B-GAIN

RETURN

MIDDLE

|IIIIIIIII|IIIIIIIII| 10

◆ AUT0 : Use this mode when the color temperature is from 2,500k to 9,500k.

◆ AWB : The function to search for the color which is matched well with the ambient environment.

◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current

lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment

should be needed.

◆ MANUAL : Manual compensation make the more detailed control possible. First, after adjusting the

white balance using the ATW or AWB mode, change the mode into the manual compensation mode

and then press Set button. While looking at the color change of the subject seen on the screen after

setting up the proper color temperature, increase the each value of the blue and the red.

- KELVIN : LOW/MIDDLE/HIGH level adjustable.

- R-GAIN : 0~20 level adjustable.

- B-GAIN : 0~20 level adjustable.

- Return : Every function is set up at the EXPOSURE menu, and then return the previous menu.

NOTE

White Balance may not work properly in the following conditions. If this doesn’t

work, use the AWB mode.

* When there is a very high color temperature in the circumstances of the subject.

( for example, clear sky, Sunset)

*▶It is very dark.

*▶If the camera is pointed directly at fluorescent light or if there is a drastic lighting

change, The operation of White balance may become unstable.