Instruction Manual

- 24 -

◆ PRIVACY [ON, OFF] : This is used to hide certain areas on the monitor. You can designate each

different 16 area. The size of a designated area can be adjusted. The color of a privacy area can

be selected various colors. When you select the return, the setting values in this function menu

are saved, then get out of this menu.

- ZONE NUM [0~15] : Select a mask out of the 16 mask areas and set the options below for the

selected mask.

ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks.

- H-POS [0~60] : Define the horizontal start position of the privacy mask.

- V-POS [0~34] : Define the vertical start position of the privacy mask.

- H-SIZE [0~60] : Define the horizontal size of the privacy mask.

- V-SIZE [0~34] : Define the vertical size of the privacy mask.

- Y LEVEL [0~20] : Define the brightness of the mask color.

- CB LEVEL [0~20] : Define the blue amount of the mask color.

- CR LEVEL [0~20] : Define the red amount of the mask color.

- TRANS [0~3] : Applies a tone from the window to act on the selected area.

PRIVACY

ZONE NUM

ZONE DISP

H-POS

V-POS

H-SIZE

V-SIZE

Y LEVEL

CB LEVEL

CR LEVEL

TRANS

RETURN

0 IIIIIIIIIIIIIIIIIII|

12 IIIIIIIIIIIIIIIIIII|

2 IIIIIIIIIIIIIIIIIII|

3 IIIIIIIIIIIIIIIIIII|

10 IIIIIIIIIIIIIIIIIII|

0 IIIIIIIIIIIIIIIIIII|

SYSTEM

This can be used when you want to select the additional function control.

1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button.

2. Select one of the mode using the Up and Down button.

EN771T IMX323_speco LPR.indd 24 2020-07-22 오후 3:20:33