Instruction Manual

- 22 -
◆ AUT0 : Use this mode when the color temperature is from 3,000k to 8,000k.
◆ AWB : The function to search for the color which is matched well with the ambient environment.
◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current
lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment
should be needed.
◆ MANUAL : Manual compensation make the more detailed control possible. First, after adjusting
the white balance using the ATW or AWB mode, change the mode into the manual compensation
mode and then press Set button. While looking at the color change of the subject seen on the
screen after setting up the proper color temperature, increase the each value of the blue and the red.
- C-TEMP : 3000K/5000K/8000K level adjustable.
- R-GAIN : 0~20 level adjustable.
- B-GAIN : 0~20 level adjustable.
- Return : Every function is set up at the WHITE BAL menu, and then return the previous menu.
DNR
This function is used to improve the picture quality by filtering the noise which is generated
under low brightness conditions. You can set different levels here.
1. Move the triangular indicator to DNR by useing the Up and Down button.
2. Select the mode to use by pressing the left or Right button and OFF/LOW/MIDDLE/HIGH
level selectable.
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 22 2020-07-22 오후 3:20:33