Instruction Manual

- 21 -
◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W
mode in the low light condition. It can adjust the delay time, starting brightness and end
brightness according to the ambient conditions by pressing the Set button.
- D>N THRES : 0~20 CDS THRES level adjustable.
- N>D THRES : 0~20 CDS THRES level adjustable.
- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W.
◆ COLOR : Making the video output color always.
◆ B / W : Making the video output B/W always.
- SMART IR : ANTI SAT ON/OFF Function.
- LED LEVEL : 0~20 IR ADJUST level adjustable.
◆ EXTERN : It can change the color or B/W mode automatically through the connection with the
ground terminal. (Option for box camera and IR camera)
- SMART IR : ANTI SAT ON/OFF Function.
0~20 level adjustable.
- GHOST_CAT[ON/OFF] : Get rid of Ghost phenomenon (image dragging) when set-up the SENS-UP.
- LED LEVEL : 0~10 IR ADJUST level adjustable.
- D>N THRES : 0~20 CDS THRES level adjustable.
- N>D THRES : 0~20 CDS THRES level adjustable.
- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W.
WHITE BAL
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 21 2020-07-22 오후 3:20:33