Instruction Manual

- 18 -
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10 IIIIIIIIIIIIIIIIIII|
AUTO
X16
10 IIIIIIIIIIIIIIIIIII|
◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
◆ SHUTTER : Select one of AUTO/MANUAL/FLICKER to adjust the electronic shutter speed.
MANUAL mode can adjust shutter speed 1/30~1/3,0000.
→ FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.
◆ SENS-UP : The bright screen can be displayed by sensing the degree of the darkness
automatically under the circumstance of low light condition or at night.
→ Off ~x32 Level Adjustable.
◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
→ 0~10 Level selectable.
NOTE
* Sens-Up mode is not worked when Electronic shutter is selected as Manual.
BACKLIGHT
On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR)
1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
EN771T IMX323_speco LPR.indd 18 2020-07-22 오후 3:20:32