Manual

- 26 -
7. IMAGE
SHARPNESS
COLOR GAIN
GAMMA
MIRROR
FLIP
D-ZOOM
ACE
DEFOG
SHADING
PRIVACY
RETURN
10 IIIIIIIIIIIIIIIIIII|
10 IIIIIIIIIIIIIIIIIII|
0.65
OFF
OFF
1.0X
OFF
OFF
OFF
◆ SHARPNESS [1 ~ 10] : Adjusts the image sharpness. If the level goes up excessively, it may affect the
video image and generate a noise.
◆ COLOR GAIN [0 ~ 20] : Changes the color gain of the camera.
◆ GAMMA [0.45 ~ 0.65] : Changes the gamma curve of the camera.
◆ MIRROR [ON, OFF] : Mirrors the image horizontally on the screen.
◆ FLIP [ON, OFF] : Flips the image vertically on the screen.
◆ D-ZOOM: You can use the digital zoom with x1~x16 magnifications.
◆ ACE [OFF/LOW/MIDDLE/HIGH] : Intelligent lighting level control to over come even strong backlight
conditions.
◆ DEFOG [ON, OFF] : This function helps to recognize the object in a dusty weather condition.
ON, a submenu appears where you can make finer adjustments.
◆ SHADING [ON, OFF] : Compensates the shading effects of lenses when the lens is set to a very wide angle.
This function will reduce the brightness difference between the centre and the edges. If you select
ON, a submenu appears where you can make finer adjustments.
◆ PRIVACY [ON, OFF] : This is used to hide certain areas on the monitor. You can designate each different
15 area. The size of a designated area can be adjusted. The color of a privacy area can be selected
various colors. When you select the return, the setting values in this function menu are saved, then get
out of this menu.
Speco(Fit).indd 26 2020-05-21 오전 9:52:25