Manual

- 24 -
5. WHITE BAL
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
◆ AUT0 : Use this mode when the color temperature is from 3,000k to 8,000k.
◆ AWB : The function to search for the color which is matched well with the ambient environment.
◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current
lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment
should be needed.
◆ MANUAL : Manual compensation make the more detailed control possible. First, after adjusting the
white balance using the ATW or AWB mode, change the mode into the manual compensation mode
and then press Set button. While looking at the color change of the subject seen on the screen after
setting up the proper color temperature, increase the each value of the blue and the red.
- C-TEMP : 3000K/5000K/8000K level adjustable.
- R-GAIN : 0~20 level adjustable.
- B-GAIN : 0~20 level adjustable.
- Return : Every function is set up at the WHITE BAL menu, and then return the previous menu.
MENU
1. 2-MOTORIZED
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
INTENSIFIER
AUTO
MIDDLE
NOTE
The White Balance may not be worked properly in the following conditions. If this doesn’t work, use the AWB mode.
* When there is a very high color temperature in the circumstances of the subject. ( for example, clear sky, Sunset)
*▶It is very dark.
*▶If the camera is headed to the fluorescent light directly or if there is a drastic lighting change, The operation of
White balance may become unstable.
Speco(Fit).indd 24 2020-05-21 오전 9:52:25