Manual

- 23 -
4. DAY&NIGHT
You can change the color mode of color or black / white by setting up the mode.
1. Select Day&Night using the Up or Down button on the Set Up menu screen.
2. Select the desired mode using the Left or Right buttons.
◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the
low light condition. It can adjust the delay time, starting brightness and end brightness according to the
ambient conditions by pressing the Set button.
◆ INTENSIFIER : The bright screen can be displayed by sensing the degree of the darkness automatically
under the circumstance of low light condition or at night.
- SMART IR. : 0~20 smart IR level adjustable.
- GHOST_CAT[ON/OFF] : Get rid of Ghost phenomenon (image dragging) when set-up the SENS-UP.
- LED LEVEL : 0~10 IR ADJUST level adjustable.
- D>N THRES(CDS) : 0~20 CDS THRES level adjustable.
- N>D THRES(CDS) : 0~20 CDS THRES level adjustable.
- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W.
4. DAY&NIGHT
SMART-IR
GHOST_CAT
LED LEVEL
D&N THRES(CDS)
N&D THRES(CDS)
DELAY
RETURN
2 IIIIIIIIIIIIIIIIIII|
OFF
10 IIIIIIIIIIIIIIIIIII|
13 IIIIIIIIIIIIIIIIIII|
7 IIIIIIIIIIIIIIIIIII|
LOW
MENU
1. 2-MOTORIZED
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
INTENSIFIER
AUTO
MIDDLE
Speco(Fit).indd 23 2020-05-21 오전 9:52:25