User Manual

4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor and then loosen the
fixed ring to adjust the view angle of the camera. Tighten the fixed ring after the adjustment.
3
Fixed Ring
Pan 360°
Tilt 90°
►Mounting for H8D6M
1. Loosen the screws to open the lower dome and then loosen the lock screw to remove the mounting base.
2. Attach the drill template to the place where you want to fix the camera and then drill 4 screw holes
and 1 cable hole (if you want to route the cables through the mounting base) according to the drill
template.
∅6
∅148
∅22
88 mm
89mm
Lock Screw
Lower Dome