User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
FAQ
DVR User Manual
87
Fig 10-1 Fig 10-2
Q9. How to play the backup file?
a. Record backed up by DVR: insert the USB device in which the record backup files is saved to the USB
interface of the PC and then open the USB device path. The record can be backed up in the private format
and AVI format by DVR.
⚫ If you select the private format when backing up record by DVR, a RPAS (Recording Player Application
Software) compression package will be backed up to the USB device automatically along with the record
data. Uncompress the “RPAS.zip” and then click “RPAS.exe” to set up RPAS. After the setup is completed,
open RPAS player and then click “Open Folder” button in the middle of the interface to select the record
data. Refer to Fig 11-1.
Select camera in the resource tree on the left side of the interface to play the camera record. Click on
the tool bar under the camera image to enable audio. Refer to Fig 11-2.
⚫ If you select the AVI format when backing up recorded video by DVR, the recorded video can be played by
the video player which supports this format.
b. Recorded video backed up through web. The recorded video can only be backed up with AVI format
through web. The recorded video can be backed up to PC and played by the video player which supports this
format.
Note: The record will not have audio output if you disable the audio when recording by DVR. Please
see 7.1.1 Mode Configuration and 7.2 Encode Parameters Setting for details.