User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Introduction
DVR User Manual
3
⚫ Press and hold the right mouse button for 5 seconds in any interface to switch the output to VGA and the DVR will display the video at the
lowest resolution which the DVR supports
1.3 Front Panel Descriptions
The following descriptions are for reference only.
Name
Descriptions
REC
When recording, the light is blue
Net
When access to network, the light is blue
Power
Power indicator, when connection, the light is blue
1.4 Rear Panel Descriptions
To quickly get started, connect the following to your recorder in the following order, please refer to the following
figure (H24HRL shown for reference).
1. Connect analog cameras to the video input ports (BNC) of the recorder.
2. Connect a monitor to the recorder via VGA or HDMI cable (not included).
3. Connect the included optical mouse into any USB port of the recorder.
4. Connect the power adapter to the recorder and plug power cord into a 120VAC 50/60Hz outlet.
5. Connect recorder to network (optional)
1.5 Connections
⚫ Video Connections
Video Input: Supports BNC video input.
Video Output: Supports CVBS/VGA/HDMI video output. You can connect to monitor through these video
output interfaces simultaneously or independently.
⚫ Audio Connections
Audio Input: Connect to microphone, pickup, etc.
Audio Output: Connect to headphone, sound box or other audio output devices.