User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Remote Surveillance
DVR User Manual
83
Button
Meaning
Click to step backward 30s and click to step forward 30s.
Backup start time button. Click the time scale and then click it to set the backup start time.
Backup end time button. Click the time scale and then click it to set the backup end time.
Export button.
Backup tasks button. Click it to view the backup status.
Event list button. Click it to view the event record of manual/schedule/sensor/motion.
12.4.3 Remote Export
Click “Export” in the remote interface to go to the export interface. You can export the record by event
search or by time search.
➢ Event Search
Check the record type on the left side of the interface and then click to set the start time and end time;
check the cameras and then click on the right side to search the record (the searched record data will be
displayed in the list); check the record data in the list and then click “Export” button to export the record.
➢ Time Search
Click to set the start time and end time on the left side of the interface; check the cameras and then
click on the right side to backup the record.
➢ Snapshots
The system will display all the captured images automatically in the list. Click to delete the image. Click
to pop up the “Export” window. Click to pop up the “View Image” window. Click to export
the image.
➢ View Export Status
Click “Export Status” to view the export status. Click “Pause” to stop the export; click “Resume” to continue
the export; click “Delete” to delete the task.
12.4.4 Intelligent Analysis
Click “Intelligent Analysis” in the remote interface to configure smart search, statistics, target database, face
attendance and face check in. All of these settings are similar to that of the DVR. See the configurations of
the DVR for details.
12.4.5 Remote Configuration
Click “Function Panel” in the remote interface and then configure the camera, record, alarm, disk, network,
account and authority and system of the DVR remotely. All of these settings are the same as the settings of
the DVR. See the configurations of the DVR for details.