User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Remote Surveillance
DVR User Manual
80
Modify Password: click it to change the password of the current login user. Enter the current password and
then set a new password in the popup window. Click “OK” button to save the new password.
Local Settings: click it to change the local settings. Set the snapshot number and click “Browse” to set the
snapshot path and record path as shown below. Click “Apply” button to save the settings.
12.4.1 Remote Preview
Click “Live View” in the remote interface to go to the live view interface. The live view interface consists of
the four areas marked in the following picture.
➢ Start Preview
Select a window in the preview area and then click one online camera on the left panel to preview the
camera in the window. You can click in the tool bar to view all the cameras.
➢ Left Panel Introduction
Click on the left panel to hide the panel and click to show the panel. You can view all the added
cameras and groups on the left panel.
⚫ View Camera
Click to view the cameras. You can view the number of all the added cameras and the online
cameras. For instance, the left number 3 in on the left panel stands for the number of online
cameras; the right number 4 stands for the number of all the added cameras. Enter the camera name in the
search box and then click to search the camera. Click to refresh the camera list.
⚫ View Scheme
Click to view the scheme (or planning). All schemes can be shown in the left panel. Double
click the scheme name to invoke it quickly