User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Alarm Management
DVR User Manual
62
9.6 Manual Alarm
Click on the tool bar at the bottom of the live view interface to pop up a window. Click “Trigger” to start
alarm. Click “Clear” to stop alarm.
9.7 View Alarm Status
Click Start→Settings→Alarm→Alarm Status or click on the tool bar at the bottom of the live view
interface to view the alarm status.
Click “Clear” button to stop the buzzer when the buzzer alarm happens. Click to view the detail
information as shown below.
If the exception information is more than one page, you can enter the number in the box and then click
to jump to the specified page. Click / to view the exception alarm information in the
previous/next page. Click to play the alarm record.