User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Alarm Management
DVR User Manual
50
8.4.3 Time Search
① Click Start→ Search and Export→Time Search to go to the “Time Search” tab as shown below.
② Click on the bottom of the interface to add playback camera. A maximum of 16 cameras can be
added for playback. Click “Modify” on the top right corner of the camera window to change the camera and
click “Clear” to remove the camera.
③ Click the camera window to play the record in the small playback box on the left side of the interface. You
can set the date on the top left of the interface, check the event type as required and click the time scale or
click under the time scale to set the time. The camera window will play the record according to the
time and event type you set.
④ Drag the color blocks on the time scale to select the record data (or click “Set Backup Time” button on the
bottom left corner of the interface to set the backup start time and end time) and then click “Export” button
for record backup. Click “Playback” button to play the record in the playback interface.
8.4.4 Event Search
① Click Start→Search and Export→Event Search to go to “Event Search” tab as shown below.
② Check the event type in the interface as required.
③ Click to set the start time and end time on the top left of the interface.