User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Alarm Management
DVR User Manual
48
② Select one camera in the interface and then click “Open” button.
③ Click the image box to play the record in the small playback box on the left side of the interface (the box
which has image inside indicates that the record data exist).
④ Refer to the picture below. Drag the color blocks on the time scale to select the record data and then click
“Export” button to pop up the “Record Backup” window as shown below. Select the device name, backup
format and path and then click “Export” button to start the backup.
⑤ Click “Playback” button to play the record in the playback interface (refer to 8.2 Playback Interface Introduction for
details). Click “Exit” to exit the interface.
Note: If you back up the record in private format, the system will back up a RPAS player to USB
device automatically. The private format record can be played by RPAS player only.