User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Alarm Management
DVR User Manual
47
⚫ Smart Playback by Drawing Quadrilateral
Click and draw a quadrangle in the desired area. Then the system will automatically search the record
files of this area. The cyan blocks indicate that there are intelligent recording files. Move the cursor to such
block and click to play the record.
8.4 Record Search, Playback &Export
The record data and the captured pictures can be exported through network, USB (U disk or USB mobile
HDD). The file system of the export devices should be FAT32 format.
8.4.1 EZ Search
① Click Start→Search and Export→EZ Search to go to the “EZ Search” tab. There are two view modes: by
time and by camera. In the time view mode, a maximum of 64 camera thumbnails can be shown. If the
camera thumbnail number is more than 64, the cameras will be listed directly by their camera name, not the
thumbnail. A maximum of 196 camera names can be listed. If the camera name number is more than 196,
the time view mode will be disabled and the camera view mode will be available only.