User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Record & Disk Management
DVR User Manual
38
Set the schedule name and schedule time and then click “Add” to save the schedule. You can set day
schedule or week schedule. : add button; : delete button.
➢ Set Day Schedule
Click and then drag the cursor on the time scale to set record time; click and then drag the cursor
on the time scale to delete the selected area.
You can manually set the record start time and end time. Click or and then click “Manual” on each
day to pop up a window as shown below. Set the start and end time in the window and then click “OK” to
save the settings.
Click “All” to set all day recording; click “Reverse” to swap the selected and unselected time in a day; click
“Clear All” to clear all the selected area in a day.
Click “Copy To” to copy the schedule of the day to other days. Refer to the picture below. Check the days in
the window and then click “OK” to save the settings.