User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Record & Disk Management
DVR User Manual
37
7.3 Schedule Setting
7.3.1 Add Schedule
Click Start→Settings→Record→Record Schedule→Edit Schedules to go to the interface as shown below.
“24×7”, “24×5” and “24×2” are the default schedules; you cannot edit or delete “24×7” while “24×5” and
“24×2” can be edited and deleted. Click the schedule name to display the detailed schedule information on
the left side of the interface. The seven rows stand for the seven days in a week and each row stands for 24
hours in a day. Blue stands for the selected time and gray stands for unselected time.
Click to add a new schedule. Refer to the picture below.