User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
PTZ
DVR User Manual
32
Select camera and then click “Add” button to add preset; or click in the camera list on the right side of
the interface to display the preset information of the dome and then click to add preset. The
operations of the “Add Preset” window is similar to that of the PTZ control interface; please see 6.1 PTZ Control
Interface Introduction for details.
➢ Edit preset
Select camera and preset. You can enter the new name of the preset and then click to save the new
preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and then click “Save
Position” to save the preset.
➢ Delete Preset
Select camera and preset and then click “Delete” to delete the preset.
6.3 Cruise Setting
Click Start→Settings→Camera→PTZ→Cruise to go to the interface as shown below.
➢ Add Cruise
Click in the camera list on the right side of the interface to display the cruise information of the dome
and then click to add cruise. The operations of the “Add Cruise” window is similar to that of the PTZ
control interface; please see 6.1 PTZ Control Interface Introduction for details.
➢ Edit Cruise
Select the camera and cruise in the “Cruise” interface. Enter the new cruise name and then click to
save the cruise name. Click “Add Preset” to add preset to the cruise. Click to edit the preset. Click
to delete the preset from the cruise. Click one preset in the preset list and then click to move down the
preset and click to move up the preset. Click to start the cruise and click to stop it.
➢ Delete Cruise