User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
PTZ
DVR User Manual
28
6 PTZ
6.1 PTZ Control Interface Introduction
You can control the IP dome or PTZ which connects to the IP camera for PTZ control.
Click on the tool bar at the bottom of the live view window to go to the PTZ control interface as shown
below. You can select another IP dome or PTZ which connects to the IP camera on the top right of the
interface for PTZ control.
Introductions of the buttons on the bottom right of the interface:
Button
Meaning
Click / / / / / / /
to rotate the dome. Click to stop rotating the dome.
Click / to zoom in / out the camera image.
Click / to increase / decrease the focal length.
Click / to increase / decrease the iris of the dome.
Drag the slider to adjust the rotating speed of the dome.
/
Click / to start / stop recording.
/
Click / to hide / show the analog joystick.
Click it to return to the live view interface.
➢ Analog Joystick Control
The analog joystick on the left side of the interface provides quick PTZ control. The dome or PTZ will rotate
when you drag the analog joystick. The farther you drag the analog joystick from the middle of the image,
the faster the dome or PTZ rotates. The dome or PTZ will stop rotating when you stop dragging the analog
joystick.