User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Live View Introduction
DVR User Manual
20
The single channel zoom interface is as shown below. Press and drag the blue box to select the zoom in area.
Click / to zoom the image. Click the camera selection box to select other cameras for
amplification. Click “Back” to return to the live view interface.
5.2 View Mode
5.2.1 Display Mode
Set different screen modes and cameras’ display sequences as needed and then save the display modes
classified by surveillance areas, priorities and so on. Refer to the picture below. Double click one display
mode in the display mode list to view the live images in this mode.
➢ Add Display Mode
Method One: