User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
EZ Setup & Main Interface
DVR User Manual
13
Click “Camera” to view all the added cameras in the camera list. Select one camera window on the left side
of the interface and then double click one camera in the list to preview the camera image in the selected
window.
Click “Customize Layout” to view all the display modes in the display mode list (refer to 5.2.1 Display Mode for
detail configuration of the display mode). Double click one display mode in the list to switch to the display
mode for previewing.
Introduction of area ③:
Icon / Button
Meaning
It shows the current login user.
Click to go to record search and export interface, see 8.4 Record Search,
Playback & Export for details.
Click to go to playback interface (click on the tool bar at the bottom of the
live view interface to set the default playback time), see 8.2 Playback Interface
Introduction for details.
Click to pop up the setup panel, see 3.2.2 Setup Panel for details.
Click to log out the system.
Click and then select “Logout”, “Reboot” or “Shutdown” in the popup window.
Click to go to the EZ setup.
3.2.2 Setup Panel
Click Start→Settings to bring up the setup panel as shown below.