User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
EZ Setup & Main Interface
DVR User Manual
11
Scheduled: Set the “Sensor Record”, “Motion Record” and “Schedule Record” of each camera. Click “OK” to
save. See 7.1.1 Mode Configuration for details.
⑦ QR Code. Enable the NAT function in the interface or set it in the network configuration after exiting the
wizard (please refer to 11.1.8 NAT Configuration for details). You can scan the QR Code through the Speco Blue
App available for iOS and Android to easily and securely view your cameras. Please refer to 12.1 Mobile Client
Surveillance for details. Click “OK” to save the settings.
3.2 Main Interface
3.2.1 Main Interface Introduction