User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
EZ Setup & Main Interface
DVR User Manual
8
Click “OK” to start wizard. The EZ Setup steps are as follows.
① System Login. Set your own password when you use the wizard for the first time (the default username of
the system is admin); select the login username and enter the password you set by yourself.
Click “Next” to continue or click “Cancel” to exit the wizard.
② Network Settings. Select the network work pattern as required. Check “Obtain an IP address
automatically” and “Obtain DNS automatically” to get the IP address and DNS automatically (the DHCP
function of the router in the same LAN should also be enabled), or manually enter them. Enter the HTTP
port, RTSP port and Server port (please see 12.1.2 Port Configuration for details). Click “Next” to continue.