User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record& Disk Management
- 8 Playback& Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
EZ Setup & Main Interface
DVR User Manual
7
3 EZ Setup & Main Interface
3.1 EZ Setup
The disk icons will be shown on the top of the startup interface. You can view the number and status of each
disk quickly and conveniently through these icons ( : no disk; : unavailable disk; : RW available disk).
You must configure the wizard if you start the DVR for the first time (or click “Skip” to cancel the EZ Setup
next time).
System Login. Set your own password when you use the wizard for the first time; select the login username
and enter the corresponding password next time.
Enable pattern lock and click “Edit” to set the pattern lock.
Click “Next” to set questions and answers for password security of admin. If you forget the password, please
refer to Q4 in Appendix A FAQ for details.
Click “Next” to continue.
After you log in, you will see an EZ setup interface as shown below.