Quick Start Guide

6
 Time format: Choose between 24-hour mode or 12-hour mode.
 NTP: Specify an NTP server to synchronize the time (optional).
Figure 4-1
4.2 EZ Network Setup
 Next, set the network of the DVR. Go to Start → Settings → Network →TCP/IP. Input IP address, subnet mask,
gateway, etc. If using DHCP, please enable DHCP in both the DVR and the router.
 Go to Start → Settings → Network → Port. Input HTTP port (the default value is 80), server port (the default
port is 6036).
Figure 4-2