User Guide
Table Of Contents
- Main Features
- Initial Boot up Process
- Name, Function and Connection
- Setting up the DVR
- 4-1. Setup – Main Live Screen
- 4-2. Setup – SYSTEM Mode
- 4-3. Setup – RECORD Mode
- 4-3-1. Recording Schedules
- 4-4. Setup – DEVICE Mode
- 4-5. Setup – DISPLAY Mode
- 4-6. Setup – NETWORK Mode
- 4-6-1. Network Types
- 4-6-2. DDNS
- 4-6-3. Network Port and Web Port
- 4-6-4. Network Stream
- 4-7. Setup – USER MANAGEMENT Mode
- 4-8. Setup – STORAGE Mode
- 4-9. Setup - CONFIG Mode
- 4-9-1. Firmware Upgrade
- Live, Search and Playback
- Export and Back Up
- Network Access Using the Multi-Sites Network Viewer
- 7-1. Overview
- 7-2. PC Requirements
- 7-3. Installation of the Program
- 7-4. Live Window
- 7-4-1. Main User Interface
- 7-4-2. Control Buttons
- 7-5. Search and Playback Window
- 7-5-1. Main User Interface
- 7-5-2. Main Control Panel
- 7-6. Setup of SpecoTech Multi Client
- 7-6-1. General
- 7-6-2. Event
- 7-6-3. Record
- 7-6-4. Display
- 7-6-5. Language
- 7-6-6. About
- 7-7. Remote Setup
- 7-7-1. System
- 7-7-2. Record
- 7-7-3. Device
- 7-7-4. Display
- 7-7-5. Network
- 7-7-6. User Management
- 7-7-7. Storage
- 7-7-8. Remote Upgrade
- 7-8. Operation
- 7-8-1. Addition, Delete, and Modify of DVR Sites
- 7-8-2. Connect and Disconnect
- 7-8-3. Still-image Capture During Live
- 7-8-4. Recording Video on Local PC During Live
- 7-8-5. Local Playback and Remote Playback
- 7-8-6. AVI Backup during Playback
- Network Access Using the Web-Browser Viewer
- Network Access Using the Smart Phone Viewer
- APPENDIX: Network Connection - LAN
- APPENDIX: Network Connection – Internet and DDNS
44
DISK INFO
Hard drive information.
Displays the following information:
RECORDING
LIMIT
Enable recording limit : The amount of data recorded in HDD will be limited
to the most recent number of days as set by
“
RECORDING LIMIT DAYS
”
.
Disable recording limit : When OVERWRITE is ON, DVR will continue to
record when HDD is full and overwrite older data. When OVERWRITE is OFF,
DVR will stop recording when the HDD is full.
RECORDING
LIMIT DAYS
Set the recording limit days. (1- 90 days)
If the RECORDING LIMIT DAYS are set to 1, the data will be overwritten after 24
hours.