User Guide
Table Of Contents
- Main Features
- Initial Boot up Process
- Name, Function and Connection
- Setting up the DVR
- 4-1. Setup – Main Live Screen
- 4-2. Setup – SYSTEM Mode
- 4-3. Setup – RECORD Mode
- 4-3-1. Recording Schedules
- 4-4. Setup – DEVICE Mode
- 4-5. Setup – DISPLAY Mode
- 4-6. Setup – NETWORK Mode
- 4-6-1. Network Types
- 4-6-2. DDNS
- 4-6-3. Network Port and Web Port
- 4-6-4. Network Stream
- 4-7. Setup – USER MANAGEMENT Mode
- 4-8. Setup – STORAGE Mode
- 4-9. Setup - CONFIG Mode
- 4-9-1. Firmware Upgrade
- Live, Search and Playback
- Export and Back Up
- Network Access Using the Multi-Sites Network Viewer
- 7-1. Overview
- 7-2. PC Requirements
- 7-3. Installation of the Program
- 7-4. Live Window
- 7-4-1. Main User Interface
- 7-4-2. Control Buttons
- 7-5. Search and Playback Window
- 7-5-1. Main User Interface
- 7-5-2. Main Control Panel
- 7-6. Setup of SpecoTech Multi Client
- 7-6-1. General
- 7-6-2. Event
- 7-6-3. Record
- 7-6-4. Display
- 7-6-5. Language
- 7-6-6. About
- 7-7. Remote Setup
- 7-7-1. System
- 7-7-2. Record
- 7-7-3. Device
- 7-7-4. Display
- 7-7-5. Network
- 7-7-6. User Management
- 7-7-7. Storage
- 7-7-8. Remote Upgrade
- 7-8. Operation
- 7-8-1. Addition, Delete, and Modify of DVR Sites
- 7-8-2. Connect and Disconnect
- 7-8-3. Still-image Capture During Live
- 7-8-4. Recording Video on Local PC During Live
- 7-8-5. Local Playback and Remote Playback
- 7-8-6. AVI Backup during Playback
- Network Access Using the Web-Browser Viewer
- Network Access Using the Smart Phone Viewer
- APPENDIX: Network Connection - LAN
- APPENDIX: Network Connection – Internet and DDNS
36
4-5. Setup – DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the ESC button.
Figure 4.5.1. DISPLAY Setup Screen
Table 4.5.1. Menu Items in DISPLAY Setup Screen
Item Description
OSD
Enable/Disable displaying CHANNEL NAME, VIDEO LO
SS and
STATUS BAR & ICON.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD) (50~100)
MAIN MONITOR
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQUENCE
DWELL TIME
Set the dwell time of each,
Single channel display time in sequence mode (3~60 seconds)
SITE
Select a channel to apply the name and covert settings change using the
mouse or the remote control.