User Guide

36
4-5. Setup – Display Mode
In the Setup menu, select the Display tab. Then, the Display menu is displayed as pictured below. Navigate
through the menu items or change the settings using the mouse or the remote control. To return to the
previous setup menu screen, press the “ESC” button on front panel or select the other menu tab with
mouse.
Figure 4.5.1. Display Setup Screen
Table 4.5.1. Menu Items in Display Setup Screen
Item Description
OSD Enable/Disable displaying Channel Name/ Video Loss/ Status Bar &
Icon/ Camera Type and Record Mode
OSD Contrast Set the visibility level of the On Screen Display (OSD) (50~100)
Main Monitor
Sequence
Enable/disable sequential display of video in full screen mode.
Sequence-Dwell
Time
Set the dwell time of each,
Single channel display time in sequence mode (3~60 seconds)
Site Select a channel to apply the name and covert settings change using the
mouse or the remote control.
Select a channel to apply the following settings using the mouse.