User Guide

103
APPENDIX: Network Connection - LAN
1. Install the network client software from the supplied CD.
2. Check the IP address from SETUP > SYSTEM > DESCRIPTION or SETUP>NETWORK of DVR.
3. Run the network client software.
4. Input Site Name, Site Address (IP address), Port Number, and Password on the connect window.
 Site Name: Input a name that properly describes a site.
 IP Address: Input IP address
 Port Number: Default Port Number is “5445”.
 ID: Input ID of DVR. Default ID is “admin”.
 Password: Input network password of DVR that is same with DVR setup password
5. Select a site by checking the box, and Press button to connect to the site.