User Guide

RESOLUTION

Select HD TVI or 960H for analog cameras using the mouse or the remote control.

FRAME RATE

Set the frame rate for the specified channel. The sum of the frame rate values from

each channel cannot exceed the maximum frame rates for a specific recording

resolution.

QUALITY

Select the recording quality for the selected channel. Options are:

Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)

RECORDING

MODE

Assign the recording mode for the selected channel. Options are: Continuous,

Motion, Sensor, Schedule, Disable and Smart Recording (c + m : continuous &

motion, c + s : continuous & sensor). When Motion Recording is selected,

Continuous + Motion recording option can be used.

SENSOR

RECORDING

Select the sensor setting for the selected channel.

PRE RECORD

Enable/disable pre-event recording. Pre-event recording is limited to 20 minutes.

POST EVENT

RECORD

Set the post event recording time duration for the specified channel.

(10~60 seconds)

AUDIO

Enable/disable audio recording for the specified channel.

SCHEDULE

To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate

through the menu items or change the settings using the mouse or the remote

control. Select CHANNEL > select NONE, CONTINUOUS, MOTION or SENSOR >

Highlight area. To copy a schedule to a different channel, select the channel from

the COPY SCHEDULE menu.

Figure 4.3.2. Schedule Recording Setup Screen