User Guide

4-3. Setup – RECORD Mode

In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.

Navigate through the menu items or change the settings using the mouse or the remote control.

Figure 4.3.1. RECORD Setup Screen

Table 4.3.1. Menu Items in RECORD Setup Screen

Menu Item

Description

SITE

Select a channel for applying the following settings using the mouse or the remote

control. To change the values of all channels, take the following steps:

Select the following to change the values of all channels.

RESOLUTION

Select 960H, D1 or CIF using the mouse or the remote control..

FRAME RATE

Set the frame rate for the specified channel. The sum of the frame rate values from

each channel cannot exceed the maximum frame rates for a specific recording

resolution.

QUALITY

Select the recording quality for the selected channel. Options are: