User Guide

Site

Select specified channel for motion zone setup.

Motion Zone

Select either Full Zone or Partial Zone for motion detection. (Refer

to #33)

Press the right button of mouse to exit from Motion Zone grid

screen.

Motion Sensitivity

Set the motion sensitivity for the selected channel.

Control the motion sensitivity from 1 to 9. (1 : Low, 9 : High)

Key Tone

Enable/disable key tone.

Remote Controller ID

Set the remote control ID.

1. Select ID.

2. Input the remote control ID number. (0 is all)

3. An icon will indicate on the Live Screen if the remote control ID is

synchronized. The options are from 0 to 99

Sensor

Select the type of each sensor.

Option is Off, Normal Open or Normal Close.

Software Triger

Remote trigger channels. User can set the channels that want to

make a sensor recording through remotely with Software record

mode.

4-4-1. Digital Deterrent

Trigger audio message via motion detection or sensor.

Figure 4.4.2. Digital Deterrent setup screen