Installation Guide

7
3. INSTALLATION
3.1 Adjust Pan, Tilt and Rotation and the Viewing Angle
- Pan, Tilt, Rotate (3-Axis mechanism)
Panning axis can be adjusted 360°
Tilting axis can be adjusted 0° ~ 90°
Rotating axis can be adjusted
between +180° (clockwise)
and -180° (counter-clockwise)
Do not rotate more 180° as this
might cause the internal cables to
twist and disconnect or break.
- How to adjust the Viewing Angle
a. Panning 360 degree
Turn the pan base right or
left to adjust the pan angle.
b. Tilting 90 degree
Loosen the tilt lever on the right or left side of the camera board.
Control the camera tilt angle and fasten the tilt lever again.
c. Rotation 180 degree
Grasp the front side of the camera board and turn it right or left to set the exact angle of image.
3.2 How to Mount to Ceiling
Ceiling
Ceiling Tile
Drilling template
Plastic Anchor x 3
Tapping Screw
4 x 30) x 3
Dome Cover Ass'y
Torx Screw
(M3 x 15) x 3
Torx L-Wrench
Camera Ass'y
Safety Wire
The front side of the
camera
Tilt lever
Rotation
180°
Pan 360°
Tilt 90°
Pan base