Installation Guide
3
1. PRODUCT OVERVIEW
Key Features
2.0 megapixel progressive scan CMOS image sensor for excellent image quality
Low light, Ultra high sensitivity camera
IP66 compliant
Vandal-resistant
3-axis mechanism
Built-in temperature / humidity sensor
Heater operation according to humidity
Triple Stream for simultaneous operations
Up to 30 frames per second at all image resolutions
Integrated motion detection with pre- and post-alarm image / video buffering
Supports CBR (constant bit rate) and VBR (variable bit rate) modes
Tampering-Alarm function
Controllable frame rate
Privacy Masking up to 8 areas
Built-in PoE (power over Ethernet)
HTTPS support
DDNS and DHCP client
Specification
CLASSIFICATION
Night Vision Outdoor IR Camera
General
CPU
ARM1176JZF-STM ( 400 MHz, Instruction cache : 32kbyte,
data cache : 16kbyte, MMU )
Flash
2Gbit Flash Memory
SDRAM
2Gbit DDR3 Memory
Image Pickup
Image Sensor
2.0 Megapixel 1/2.8" SONY progressive scan CMOS image sensor
Total Pixels
1952(H) x 1116(V) 2.18 Megapixel
Effective Pixels
1944(H) x 1104(V) 2.14 Megapixel
S/N Ratio
More than 50dB
Min. Illumination
0.1Lux
Lens
3.6mm Megapixel Lens (F=0.94)
Video
Video Compression
H.264 High Profile @ Level 4.1, Motion JPEG
Resolutions
Up to 1920 x 1080
Frame rate
H.264 Up to 30fps with 1920 x 1080
H.264 Up to 30fps with VGA resolution
MJPEG Up to 30fps with VGA resolution
Video Streaming
Support Multi Stream with H.264, MJPEG
Adjustable Frame Rate
VBR / CBR in H.264
Image Setting
Brightness, Contrast, Sharpness
Auto White Balance Auto Exposure
Privacy Mask
DSS, Corridor-view (in H.264), Mirror / V-Flip, etc.
D-WDR (Low / Middle / High)
Network
Security
Password Protection
User Access Log
HTTPS Encryption
Supported Protocol
HTTP, HTTPS, DNS, RTSP, RTP, TCP, UDP, ICMP, DHCP
System
Intelligent Video
Motion detection 12 x 12 blocks